OBD/I Code 634 For Perodua Kancil

The following is some common obd code description for easy troubleshooting, there are others also you can check.
Description was not added yet...

Other Symptoms Of OBD Code 634 For Perodua Kancil

Before troubleshooting the code-634, please view other descriptions of it.

(O,M) Park/Neutral Position (PNP) or Clutch Pedal Position (CPP) circuit fault Electronic shift transmission - Manual Lever Position (MLP) sensor out of range in PARK - Transmissions




DESCRIPTION

Error Code :634 Loss of comm usually means a connector is to blame, first step would be to pull and inspect the connectors (in this case, the headlight switch and the cluster module) for damage, or a pin that has been shoved back, then reseat them. If that doesnt fix it, then the PITA job of looking over the whole harness for pinch points.

After removing left rear wheel,found the wire connector of left rear wheel speed sensor is normal,no loosening.And then removed the connector to check the terninal is also normal.Used multimeter to detect the wire it works correctly,no short circuit,it was inferred that the left rear wheel speed sensor was damaged.

About | Contact | Privacy

Copyright © 2019 All rights reserved. OBD trouble code informations for cars.